Rapid set repair mortars

Hychem offer a range of Velosit rapid set repair mortars and epoxy for concrete spalling, defects and structural rehabilitation.

Repair, rehabilitate, coat and protect to stop corrosion. Increase asset life span with our range of specialist products below:

Products

  • Velosit RM205 – VELOSIT RM205 Structural Concrete Repair Mortar 6 – 100 MM – 45MPa a cementitious repair mortar for concrete restoration acc. to EN 1504-9. It is used to fill large voids or build up larger cross-sections up to 100 mm. Potable Water Approved – AS/NZS 4020:2005
  • Velosit RM202VELOSIT RM 202 is a cementitous Universal Vertical & Overhead repair mortar for all types of construction substrates. It creates a good surface for coatngs and overlays. 1mm to 100mm – Final strength 50MPa
  • Velosit RM203 rapidVELOSIT RM 203 is a rapid setting cementitious repair mortar for various types of construction substrates. It creates a good surface for coatings and overlays. 1mm to 100mm – Final strength 50MPa
  • RM204
  • WP120
  • Velosit RM224 – VELOSIT RM 224 is a rapid setting cementitious smoothing compound for various types of construction substrates. It creates a very fine surface texture and is especially suitable for visible concrete areas. Application feather edge to 10 mm – 35 MPa
  • Velosit SR207 – VELOSIT SR 207 is a Sulphate-resistant, structural grade cementitious repair mortar for concrete restoration acc. to EN 1504-9. It is used to fill large voids or build up larger cross-sections up to 100 mm specifically designed for repairs in sewage and waste water structures.
  • Hychem GP
  • PF3 – Non sag epoxy adhesive & grout – Hychem PF3 is a general purpose, 1:1 epoxy adhesive with high flexural strength suitable for bonding, grouting and patching most rigid and semi rigid building materials. Hychem PF3 is available in bulk and as convenient ratio packs for easy application. Hychem PF3 when blended with a quartz aggregate, is an ideal epoxy repair compound for the repair of shallow spalling concrete caused by reinforcement corrosion. The product is extremely user friendly, as the finished repaircan be tooled with water prior to setting.

Recommended Products

Product Type

Repair, rehabilitate, coat and protect to stop corrosion. Increase asset life span with our range of specialist products below:

Products

  • Velosit RM205 – VELOSIT RM205 Structural Concrete Repair Mortar 6 – 100 MM – 45MPa a cementitious repair mortar for concrete restoration acc. to EN 1504-9. It is used to fill large voids or build up larger cross-sections up to 100 mm. Potable Water Approved – AS/NZS 4020:2005
  • Velosit RM202VELOSIT RM 202 is a cementitous Universal Vertical & Overhead repair mortar for all types of construction substrates. It creates a good surface for coatngs and overlays. 1mm to 100mm – Final strength 50MPa
  • Velosit RM203 rapidVELOSIT RM 203 is a rapid setting cementitious repair mortar for various types of construction substrates. It creates a good surface for coatings and overlays. 1mm to 100mm – Final strength 50MPa
  • RM204
  • WP120
  • Velosit RM224 – VELOSIT RM 224 is a rapid setting cementitious smoothing compound for various types of construction substrates. It creates a very fine surface texture and is especially suitable for visible concrete areas. Application feather edge to 10 mm – 35 MPa
  • Velosit SR207 – VELOSIT SR 207 is a Sulphate-resistant, structural grade cementitious repair mortar for concrete restoration acc. to EN 1504-9. It is used to fill large voids or build up larger cross-sections up to 100 mm specifically designed for repairs in sewage and waste water structures.
  • Hychem GP
  • PF3 – Non sag epoxy adhesive & grout – Hychem PF3 is a general purpose, 1:1 epoxy adhesive with high flexural strength suitable for bonding, grouting and patching most rigid and semi rigid building materials. Hychem PF3 is available in bulk and as convenient ratio packs for easy application. Hychem PF3 when blended with a quartz aggregate, is an ideal epoxy repair compound for the repair of shallow spalling concrete caused by reinforcement corrosion. The product is extremely user friendly, as the finished repaircan be tooled with water prior to setting.

Recommended Products

Product Type

Need a specification ? - It’s FREE

All you needed to do was ask us !

We would love to work with you to make sure your project is a complete success so why not fill out the form below and send it to us. We will get back to you at a convenient time and work out what we need to do next. It’s as simple as that really !