Bridge deck membrane

Our Matacryl WPM system is a proven liquid PUMA technology used extensively in Australia and worldwide. It is a bridge deck waterproofing membrane that is highly flexible, can be applied easily in a range of climatic conditions to many types of substrates. Matacryl WPM has a significant number of global test certifications including BBA, AREMA and ASTM.

Hychem supplies the Matacryl range of bridge deck membranes approved for use on bridges around the world.

Matacryl WPM- Key Benefit Summary

  • Highly flexible with excellent crack-bridging characteristics even at extremely low temperatures (-20 °C and below)
  • Easy to apply using a roller, squeegee or tooth rake
  • Thixotropic version available for vertical surfaces
  • Excellent Corrosion inhibition properties
  • Very high impact and puncture resistance
  • Withstands stress and movements in substrate
  • Excellent adhesion to many types of substrate
  • Good chemical and abrasion resistance
  • Can be applied over a wide range of ambient and substrate temperatures from minus 20°C to + 35°C
  • Can easily be repaired; excellent inter-layer adhesion due to chemical fusion bonding
  • Overcoating time not critical
  • Fully set & dry one hour after application

Waterproofing membrane and trafficable coating solutions from our specialist systems below:

  • Matacryl Primer HMATACRYL® PRIMER H is a low viscosity, violet-blue, 2 component reactive resin based on methyl methacrylate (MMA). After polymerisation, most of the violet-blue colour will disappear.
  • Matacryl ManualMATACRYL® Manual is a medium viscosity, urethane-modified, pre-reacted 100 % solid membrane system based on acrylic monomers. To initiate curing, just add MATACRYL® CATALYST.
  • Matacryl STCMATACRYL® STC is a medium viscosity, elastified and UV- protected, one component resin based on methyl methacrylate (MMA).The curing is initiated by addition of MATACRYL Catalyst powder.
  • Matacryl Tack Coat No 1Matacryl Tack Coat No1 is a modified bonding bitumen, supplied in easy to handle 10kg blocks which require less heat to achieve the optimum laying temperature. Matacryl Tack Coat No1 provides excellent adhesion performance and greater efficiency.

Contact our bridge deck waterproofing specialists for a FREE specification

We assure you that our specialists can help with all your requirements when it comes to bridge deck membranes. 

We can also help with trafficable membranes for bridges, roads and railways. 

Hychem supplies the Matacryl range of bridge deck membranes approved for use on bridges around the world.

Matacryl WPM- Key Benefit Summary

  • Highly flexible with excellent crack-bridging characteristics even at extremely low temperatures (-20 °C and below)
  • Easy to apply using a roller, squeegee or tooth rake
  • Thixotropic version available for vertical surfaces
  • Excellent Corrosion inhibition properties
  • Very high impact and puncture resistance
  • Withstands stress and movements in substrate
  • Excellent adhesion to many types of substrate
  • Good chemical and abrasion resistance
  • Can be applied over a wide range of ambient and substrate temperatures from minus 20°C to + 35°C
  • Can easily be repaired; excellent inter-layer adhesion due to chemical fusion bonding
  • Overcoating time not critical
  • Fully set & dry one hour after application

Waterproofing membrane and trafficable coating solutions from our specialist systems below:

  • Matacryl Primer HMATACRYL® PRIMER H is a low viscosity, violet-blue, 2 component reactive resin based on methyl methacrylate (MMA). After polymerisation, most of the violet-blue colour will disappear.
  • Matacryl ManualMATACRYL® Manual is a medium viscosity, urethane-modified, pre-reacted 100 % solid membrane system based on acrylic monomers. To initiate curing, just add MATACRYL® CATALYST.
  • Matacryl STCMATACRYL® STC is a medium viscosity, elastified and UV- protected, one component resin based on methyl methacrylate (MMA).The curing is initiated by addition of MATACRYL Catalyst powder.
  • Matacryl Tack Coat No 1Matacryl Tack Coat No1 is a modified bonding bitumen, supplied in easy to handle 10kg blocks which require less heat to achieve the optimum laying temperature. Matacryl Tack Coat No1 provides excellent adhesion performance and greater efficiency.

Contact our bridge deck waterproofing specialists for a FREE specification

We assure you that our specialists can help with all your requirements when it comes to bridge deck membranes. 

We can also help with trafficable membranes for bridges, roads and railways. 

Need a specification ? - It’s FREE

All you needed to do was ask us !

We would love to work with you to make sure your project is a complete success so why not fill out the form below and send it to us. We will get back to you at a convenient time and work out what we need to do next. It’s as simple as that really !