fbpx

Marine

Hychem odffers a range of solutions for marine structures, Underwater epoxy and cementitous grouts for pile remediation, corrosion resistant repair mortars and coatings.

Protect and rehabilitate marine structures from our product range.

Products

  • PF7 – Epoxy grout for underwater injection. HYCHEM PF-7 is a 100% solids, mineral filled. epoxy based grout for use in conjunction with fibreglass jackets in the rehabilitation of concrete and timber wharf piles. It may be used neat or in conjunction with coarse packed aggregate.
  • PF3 – Non sag epoxy adhesive & grout – Hychem PF3 is a general purpose, 1:1 epoxy adhesive with high flexural strength suitable for bonding, grouting and patching most rigid and semi rigid building materials. Hychem PF3 is available in bulk and as convenient ratio packs for easy application. Hychem PF3 when blended with a quartz aggregate, is an ideal epoxy repair compound for the repair of shallow spalling concrete caused by reinforcement corrosion. The product is extremely user friendly, as the finished repaircan be tooled with water prior to setting.
  • Velosit RM205 – VELOSIT RM205 Structural Concrete Repair Mortar 6 – 100 MM – 45MPa a cementitious repair mortar for concrete restoration acc. to EN 1504-9. It is used to fill large voids or build up larger cross-sections up to 100 mm. Potable Water Approved – AS/NZS 4020:2005
  • CP201 – VELOSIT CP 201 is a cementitious corrosion protection and primer for concrete, masonry and steel. It is designed as bonding bridge for the VELOSIT RM repair mortars on critical substrates.
  • WP120 – VELOSIT WP 120 is a polymer modified cementitious waterproofing slurry for concrete and masonry. It is a good substrate for coatings and overlays. Potable Water Approved – AS/NZS 4020:2005
  • Geocast – GEOCAST Geopolymer is a single component, dry packaged, polymer–modified mortar with microsilica geopolymer, pozzolan, flyash and select admixtures. It is specifically designed for horizontal, vertical
    and overhead surface repairs in reinforced concrete and brick pipes, corrugated metal pipe inverts (CMP) and arches, sewer manholes and (water) wastewater structures. The GeoCast Geopolymer withstands hydrogen sulfide (H2S) corrosion. Geocast offers high early strength and long term durability. Applications to 100mm thicknesses overhead – >62 Mpa

Protect and rehabilitate marine structures from our product range.

Products

  • PF7 – Epoxy grout for underwater injection. HYCHEM PF-7 is a 100% solids, mineral filled. epoxy based grout for use in conjunction with fibreglass jackets in the rehabilitation of concrete and timber wharf piles. It may be used neat or in conjunction with coarse packed aggregate.
  • PF3 – Non sag epoxy adhesive & grout – Hychem PF3 is a general purpose, 1:1 epoxy adhesive with high flexural strength suitable for bonding, grouting and patching most rigid and semi rigid building materials. Hychem PF3 is available in bulk and as convenient ratio packs for easy application. Hychem PF3 when blended with a quartz aggregate, is an ideal epoxy repair compound for the repair of shallow spalling concrete caused by reinforcement corrosion. The product is extremely user friendly, as the finished repaircan be tooled with water prior to setting.
  • Velosit RM205 – VELOSIT RM205 Structural Concrete Repair Mortar 6 – 100 MM – 45MPa a cementitious repair mortar for concrete restoration acc. to EN 1504-9. It is used to fill large voids or build up larger cross-sections up to 100 mm. Potable Water Approved – AS/NZS 4020:2005
  • CP201 – VELOSIT CP 201 is a cementitious corrosion protection and primer for concrete, masonry and steel. It is designed as bonding bridge for the VELOSIT RM repair mortars on critical substrates.
  • WP120 – VELOSIT WP 120 is a polymer modified cementitious waterproofing slurry for concrete and masonry. It is a good substrate for coatings and overlays. Potable Water Approved – AS/NZS 4020:2005
  • Geocast – GEOCAST Geopolymer is a single component, dry packaged, polymer–modified mortar with microsilica geopolymer, pozzolan, flyash and select admixtures. It is specifically designed for horizontal, vertical
    and overhead surface repairs in reinforced concrete and brick pipes, corrugated metal pipe inverts (CMP) and arches, sewer manholes and (water) wastewater structures. The GeoCast Geopolymer withstands hydrogen sulfide (H2S) corrosion. Geocast offers high early strength and long term durability. Applications to 100mm thicknesses overhead – >62 Mpa

Need a specification ? - It’s FREE

All you needed to do was ask us !

We would love to work with you to make sure your project is a complete success so why not fill out the form below and send it to us. We will get back to you at a convenient time and work out what we need to do next. It’s as simple as that really !